Fix Host Process For Windows Tasks Has Stopped Working
Have you seen the pop-up message telling you that the Windows services hosting process is down?
It is difficult to determine the ideal cause of such an error, as the pop-up window does not provide any further information about it. While there is no specific reason for this error, there are a number of solutions to correct it.
It is suspected that the running tasks are consuming a large amount of memory or CPU, leading to this error. Such tasks cause error pop-ups.
Without wasting much time, let’s get to the heart of how you can fix this error.
Solution 1: Repair damaged BITS files
- First, press Windows + R on the keyboard to open the Run dialog box.
- Then type the following address and press the Enter key : ProgramDataMicrosoftNetloader .
- Click Next to grant administrator rights and access to folders.
- After opening the file explorer, delete all files starting with qmgr, for example. B. qmgr0.dat, qmgr1.dat, etc.
- Once these files are removed, go to Settings → Update and Security → Windows Update.
With the above steps, replace the damaged BITS and the problem should be solved. If the above files cannot be deleted, then read this article on how to repair corrupt BITS files.
Solution 2: Use of a clean boot loader
There are situations where third-party applications conflict with the system.
A clean download can help you fix the Host Process for Windows Services error.
Normally, Windows undergoes a Clean Boot to keep the system running with minimal or no drivers and programs.
This method is used to diagnose Windows problems caused by damaged drivers and program files.
There are many ways to boot your PC in clean boot mode, but I’ll show you the main ones that will help you fix this error.
Step 1: Selective starting load
- Press the Windows + R key to open the Run utility.
- Type msconfig and click OK.
- Make sure the Selective Start check box is selected. You can find it under the General tab.
- Now uncheck the option Load Startup Objects on Selective Startup.
- Click on the Services tab and select Hide all Microsoft Services.
- Click Disable All to disable all unnecessary services that may cause conflicts.
- On the Start tab, click Open Task Manager.
- Deactivate all activated startup programs.
- Finally, click OK and restart the computer.
When everything is ready, go to the next step to troubleshoot software compatibility issues.
Step 2: Releasing half of services
- Press the Windows + R key
- Type msconfig and click OK.
- Click the Services tab and select the Hide all Microsoft services check box.
- Then select half of the services from the services list and activate them.
- Finally, click OK and restart the computer.
Solution 3: Display open events or reliability history
- Press Windows + R
- Type eventvwr and then press the Enter key on the keyboard to open the Event Viewer.
- Double-click Windows Logs in the left pane.
- Then select the Application and system logs check box.
- In the next window, look for all events marked with a red X.
- Now check the details of the error. Look for the specific error that tells you the Windows host process is no longer running.
- Once we find him, we can start troubleshooting.
However, if there is no useful information about this error, use the reliability history as described below:
- Press the Windows key and type Reliability in the search box.
- In the list of search results that appears, click the Show Reliability History button.
- Look for an event with the error message Hosting process for Windows has stopped working.
- Make a note of the process that led to this error and follow the troubleshooting instructions below.
- First, uninstall the service directly from the Control Panel if the error with the above service(s) is related to a third-party application.
Solution 4: Restoration of an operational system
System Restore is essentially the process of restoring the changes made to your computer and returning your computer to a point where you made no changes.
Occasionally, some of the programs we install on our devices, including drivers, can generate an unexpected error on the computer system. These errors can cause Windows to behave unpredictably.
Sometimes it is useful to uninstall a program or driver that you have just installed. However, this does not work in all situations, and in that case, you need to fix the problem with the restore point you created.
A restore point usually restores the system to an earlier time when everything was working properly with Windows System Restore.
Perform system recovery
If you have accidentally created a restore point or perhaps have set up automatic restore points on your PC, you can easily restore your PC’s old configuration using restore points.
Using the restore function in Windows 10
To use the recovery feature in Windows 10, follow these steps:
- Click the Start button, then type Control Panel in the search box.
- In the search result, click Control Panel to open it.
- Now click on the System and Security option and select the System option.
- Still in the System window, click System Security. It is located in the top left corner of the system window.
- Following the above steps will take you directly to the system properties window. Select the volume for which you want to perform recovery.
- Then click the System Restore button, located in the security settings.
- Click the Next button when the following screen appears.
- You will then see a list of the restore points that have been created. Simply select the last restore point from the list and click Next.
- A confirmation dialog box will appear, confirm that you want to perform a system restore, and then click Finish.
- Press the Yes button to confirm. This screen is intended only to inform you that – System recovery, once started, cannot be interrupted.
Note that once the process is started, it cannot be stopped and should not be interrupted. So make sure your computer is on.
Restore to protected mode
There are times when system restore does not work. This is usually due to various problems with Windows or software conflicts. When this happens, it means that your computer system cannot return to the desired restore point.
Thanks to Microsoft, there is a way to solve this problem. Just run Windows in safe mode.
When you start your computer in safe mode, it starts only the main part of Windows and disables any problematic software, applications, drivers or settings.
In general, a computer restored to secure mode is successful.
Follow the steps below to start your PC in Safe Mode and proceed with the recovery:
- Start the computer in safe mode using one of the methods listed here.
- Once your system is in safe mode, click on the Troubleshooting option and then Advanced Settings.
- Under Advanced Options you will see a list of six options, leave the rest and just click on System Restore.
- Select the system restore point to which you want to restore the system. Make sure you select the most recent restore point.
Be patient until the end of the process. Once the recovery process is complete, you will be taken to the login screen or desktop.
Restore if PC does not boot up
If your computer does not boot or Windows does not boot normally, you can perform a recovery.
Under these circumstances, perform the following steps:
- Make sure the computer is completely turned off.
- Press the power button and continuously press the F8 key to open the start menu.
- The troubleshooting window opens. Click on the Advanced Options button.
- Select the System Restore option and then perform steps 7 to 10 of method 1.
Although we’re focusing on Windows 10, the same steps can walk you through the recovery process on Windows 8.1 and Windows 7.
Although restoring the system is very useful, there are some things you should keep in mind.
Let me shed some light on this by looking at the recovery point or recovery process.
- System restore can do nothing but protect your computer from viruses and malware.
- If you have created new user accounts since the last restore point was installed, the last restore point will be deleted, but your data and files that you created will be retained.
- The restore point does not serve as a Windows backup.
I hope that one of the above methods helped you to use system restore on Windows 7, 6.1 and 10 and that you have now successfully resolved the error Host process for Windows services not working anymore.
Solution 5: Starting the DISM tool
Note that you should not use the SFC command when trying to fix this error, as it replaces the Microsoft Opencl.dll file with the Nvidia file.
It is therefore recommended to check the integrity of the system by running the DISM Checkhealth command.
Here’s how you can do it:
- Press the Windows + X keys.
- Select the command line (Admin).
- Now type the following commands and press the Enter key each time:
Disassembly / Online / Image cleaning / StartComponentCleaning
Dismantling / Online / Cleaning image / Restoring health
- If the above command does not fix the error, try the following command, replacing C:RepairSourceWindows with the location of the recovery source (Windows installation or Recovery Disk) :
Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:testmountwindows /LimitAccess
- To check the integrity of the system, run the DISM command:
Disassembly / Online / Cleaning Image / Health Check
- Restart the computer so that the changes take effect, and then check to see if you have fixed the error.
Solution 6: Performing a system file check
If the DISM tool did not help, the SFC tool may be useful.
- To open the Run utility, press the Windows + R keys on your keyboard.
- Now type cmd, press Enter, and then click Yes to start the command prompt with administrator privileges.
- Once the command line is open, type this command:
- Press the Enter key to run it
- Be patient until the SFC scanner has recovered the corrupted files. Do not close the command line or turn off the computer during this time.
- Restart the device after scanning is completed.
Solution 7: CCleaner and Malwarebytes running
- Start by downloading CCleaner and Malwarebytes.
- Install both programs and then run Malwarebytes.
- Give it time to scan your system and check for dangerous files. When malicious software is detected, this program automatically removes it.
- Then open CCleaner
- Go to the Cleaner section and click on the Windows tab.
- Check the following items for cleaning and then click Perform Cleaning. Give the process time.
- If you want to continue cleaning the system, go to the Registration tab and check the following:
- Select search by question
- Give the application permission to scan
- Click on the Correct selected problems button.
- Select Yes when the cleaner asks if you want to save the changes to the registry.
- Choose Correct all selected issues and the backup process is complete.
- Restart the computer to save the changes.
Solution 8: Organise a souvenir86
Make sure you have access to another PC, because we need to download the software and write it to a USB stick.
Since this repair is time consuming, you should do it at night or when you have nothing important to do.
When everything is ready, follow the instructions below:
- Connect the USB flash drive to your system.
- Download and install the Windows Memtest86 USB Flash Drive Auto Installer.
- After installing the software, right-click on the image file you just downloaded and select extract here. Open the folder and start the Memtest86+ USB Installer.
- In the next window, select the USB storage device to which MemTest86 should be written. Please note that your USB drive will be formatted during this process.
- After writing the program, disconnect the USB drive and connect it to the computer where the Windows Services host process appears to have stopped.
- Restart your computer
- Choose to boot from a USB flash drive and Memtest86 will immediately begin testing for memory corruption.
- If your computer passes all the tests in this program, your memory is working properly. However, if the other steps fail, Memtest86 will detect memory corruption. This means that this error is caused by a damaged memory.
- To resolve the error in the Windows Services host process, simply replace the RAM.
You may also consult:
frequently asked questions
How do I fix my Windows host process?
How to fix the shared host process for errors in Windows tasks …
What can I do if the Rundll32 host process stops working?
Type sfc /scannow and press Enter. Windows scans all system files (including Rundll32) and repairs damaged files. Restart the computer when the scan is completed.
Can I stop the host process for Windows services?
No, you cannot disable the Host process for Windows tasks. … This is required to be able to load DLL-based services on your system, and depending on what you are running, disabling the host process for Windows tasks can break a number of things. Windows doesn’t even allow you to finish the task temporarily.
host process for windows tasks has stopped working windows 7, host process for windows tasks 100 disk, host process for windows services has stopped working windows 7, windows 10 host process for windows tasks stopped working, windows host process (rundll32 has stopped working), host process for windows tasks high disk windows 10, host process for windows tasks has stopped working windows xp, service has stopped working windows 7