Error: The file name is not specified.

Click the Hardware tab and then click the Device Installation Options button. When the Device Installation Settings window opens, select No (the device may not work as expected) and click Save Changes.

Some users also recommend fixing the “Show or hide updates” problem to disable automatic downloads of certain updates and drivers.

To do this, download the “Show or Hide Updates” troubleshooting module, run it and disable updates and drivers you do not want to download.

If you cannot open Windows 10 normally because of the BSoD error, you can still perform these steps in safe mode. After disabling the driver updates, you need to uninstall the driver.

It is best to download and use IObit Uninstaller to completely remove all problematic software or drivers from your PC.

Get IObit Uninstaller.

After removing the problematic driver, simply download a new driver from the graphics card manufacturer’s website, but be careful not to reinstall the same problematic driver.

5. set the hard drive shutdown timer to 0

  1. Press the Windows + S keys and go to power options. Select power options from the list of results.
    Error: The file name is not specified.
  2. When the flow options open, locate the selected plan and click Change Plan Settings.
    Error: The file name is not specified.
  3. Press the Change advanced power settings button.
    Error: The file name is not specified.
  4. Go to Hard Disk > Disable Hard Disk After and set the value to 0. Click Apply and OK to save the changes.
    Error: The file name is not specified.

Note: If you get an INPUT POWER ERROR, you can correct it by setting the HDD stop timer to 0.

Make sure you are using the correct hard disk mode.

Error: The file name is not specified.

Some users have reported that the Windows 10 INTERNAL POWER SUPPLY ERROR can be caused by the wrong hard drive mode, and to fix this error you need to change the hard drive mode in the BIOS.

We strongly recommend that you read your motherboard’s manual for detailed instructions on how to do this.

7. Perform a CFS check.

  1. Go to Search, type cmd, right-click on the command prompt, and select Run as administrator. Error! Filename not specified.
  2. Type the following line and press the Enter key: sfc/scannow. Error! Filename not specified.
  3. Wait for the process to complete.
  4. Restart your computer.

Note: SFC is an integrated tool in Windows 10 for fixing various system problems. Although it does not necessarily mean that it will solve our problem, we can always try it.

8. Cleaning up unwanted files

  1. Go to “Search”, enter this PC and open this PC.
  2. Right-click on the system drive (probably C:) and go to Properties.
  3. Now click on “Clean up disk”.
  4. Then go to “Clean up system files”. Error! Filename not specified.
  5. Now tick everything you want to delete.
  6. Press OK.
  7. Wait for the process to complete.
  8. Restart your computer.

Note: Some unnecessary files on your computer may be causing the Windows 10 INTERNAL POWER ERROR, so the obvious solution in this case is to delete them.

9. Check if the hard drive is damaged.

  1. Go to “Search”, enter this PC and open this PC.
  2. Right-click on the system drive (probably C:) and go to Properties > Tools.
  3. Under “Checking Errors”, go to “Checking”. Error! Filename not specified.
  4. Just click the “Scan Station” button and wait for the process to complete.

Note: While we are on the hard drive, let’s also quickly check for errors on the hard drive. Because these errors can also cause an INPUT POWER ERROR in Windows 10.

The BSoD input error can be problematic, but since it is usually caused by an incompatible driver, it can be easily corrected with one of our solutions.

If you have similar problems, don’t hesitate to write to us in the comments.

FAQs : More information about INTRODUCTION and INTRODUCTION FAILURES

  • How do I resolve the input error?

There are many solutions to this problem. We recommend that you follow our guide to solving INPUT ERROR problems.

  • How do I fix the blue screen in Windows 10?

There is no exact recipe to solve BSoD errors, as they are very diverse and have many causes. Nevertheless, we have a comprehensive list of BSoD error codes and solutions available for you.

  • What are the causes of errors in the blue screen of death?

We cannot say for sure what causes Blue Screen of Death errors. For more information, see our guide listing the most common causes of BSoD errors.

Editor’s note: This article was originally published in October 2017 and revised and updated in February 2021 to ensure timeliness, accuracy and completeness.

Frequently asked questions

How do I resolve a blocked error code?

How to find shutdown codes and fix errors in Windows 10 – MakeUseOf

How do you permanently fix the blue screen of death?

Blue screen of death “BSOD” – What can you do to prevent it?

What does the stop code of Bad_pool_caller mean?

This error means that you may need to restore the previous configuration of your PC. Turn off the computer by holding down the power button, then waiting and pressing the power button again. When you see your PC manufacturer’s logo, turn the computer off again. Repeat this process until you see the message “Please wait”.

internal power error 2020,how to fix internal power error windows 10,internal power error after sleep,internal power error windows 10 reddit,internal power error windows 7,internal power error windows 8,internal_power_error (a0),internal power error sd card

You May Also Like

How to customize the APK file name for product flavors? –

Development issue/problem: I configure the MOT file name of my Android application…

What is Backlight Bleeding and How to Fix it?

The liquid crystal display (LCD) has an LED backlight that lets light…

How Many Websites Can I Host On A Dedicated Server?

Hosting your website on a dedicated server simply means that your website…

Civ 5 video settings not saving [Easy Fixes]

I’m hoping to blog on a few new technology topics in the…