The Reboot to fix hard drive errors message is a legitimate error message sent by Windows 10 when a hard drive error is detected. When Windows repeatedly detects an error on a disk, it displays an error message similar to an info-virus on each reboot. So what does this error mean? Is that a viral clue? How can I fix this? I will try to answer these questions in this post and I hope they can clear your doubts about this particular error and help you fix the player and get rid of the error.

What does restart mean to clear player errors?

An error message indicates that Windows has detected unexpected disk errors on one of the attached storage drives (this can be an internal or external drive) and that the problematic drive needs to be repaired (check the performance of the drive), which can only be done by restarting the computer.

If a notification error occurs, you cannot access the data on the problematic drive until you restart and repair the computer.

Is the request to restart the disk error a virus message?

Is this pop-up message a virus or malware? Well, not usually. However, if the malware manages to disguise itself by displaying an error message similar to Restart to Repair Disk to entice you to click on it, it may be a threat. If you actively protect your PC with an antivirus program or Windows Defender, you won’t have to worry that the error is a virus or malware.

A better question would have been: Can rebooting to fix hard drive errors be caused by a virus or malware? This error only indicates that Windows encountered an unexpected error while reading or writing to one of the hard disks. The causes of drive failure can be very broad and varied. To answer the question: Yes, although it is extremely rare, a virus or malware can cause a disk failure.

How to reboot to fix hard disk errors in Windows 10

Restart the PC so that Windows can automatically check the drive.

The error message requires the PC to reboot so that Windows can perform a disk check (scan the disk for errors and correct them) on the problematic drive during the boot process (before Windows starts).

The solution is to simply restart the computer and have Windows automatically perform the disk scan (without pressing a key to skip the process at startup). Depending on the size of the media and the amount of data it contains, it may take some time to work on the reference media. Do not interrupt the process, unless absolutely necessary, until it is complete.

Running the CHKDSK command manually in Windows 10

If the automatic disk scan does not start at startup or does not resolve the error, you can run the CHKDSK command in Windows 10 manually from the command line.

This only works on disks that are not your system disk, i.e. the disk on which Windows is stored and running. Scanning the actuator into the system is only possible during commissioning, as this is the only time the actuator is not in operation.

To run a command, first search for Command Prompt in the Windows 10 search bar. Right-click in the search results and select Run as Administrator.

In the command line window, type the following command.

Chkdsk D: /f /r /x

Message: Replace D: with the drive letter from which you want to run CHKDSK.

If you do not know which drive is causing the error message Restart to Repair Drive, restart your computer to let Windows check the drive. During this process, pay attention to the drive that Windows is trying to scan: that will be the problematic drive.

From the command line, CHKDSK can search for errors on the disk, correct them if necessary, locate bad sectors on the disk, and recover readable information. The /x parameter is used to force the removal of the disk if it is used.

Learn more about the CHKDSK command and its parameters: How to run CHKDSK in Windows 10 using CMD.

Restart to clear drive errors always displays.

CHKDSK should be able to fix most plate errors automatically. If CHKDSK finds unreadable sectors or displays an error that the program itself could not resolve, you should consider replacing the hard drive.

Also, try running the following commands at the command prompt (one line at a time) and see if that fixes the problem.

cfc/scans

SFC can automatically scan damaged and missing system files and repair or replace them in Windows 10.

Dismantling / Online / Image cleaning / Health restoration

DISM is a utility built into Windows that automatically updates files and resolves service issues for Windows 10 images.

Another way to check the health of a drive is to use the drive manufacturer’s software. If you z. B. If you have a Western Digital hard drive, download and use the Western Digital Data LifeGuard Diagnostics software.

If both CHKDSK and the disk health analyzer return errors, it means that the disk has started to fail or has already failed. If you don’t want to lose your data (if it’s not already corrupted), you should replace the drive before it’s too late.

Description to share: Is the error message Reboot to restore drive still displayed after rebooting? What does that mean? Is that a viral clue? Here’s how to fix it.

frequently asked questions

What does a restart mean to clear drive errors?

Specifically, this error indicates the following: Windows has detected errors on this disk that need to be corrected. You must restart the computer to correct disk errors detected by the built-in Windows checker. Access to the data is only possible after the PC has been rebooted after the disk repair.

Why do I keep making driving mistakes?

This may be due to hard drive issues, failed updates, loading of the Windows registry. And you’re not the only Windows user who has to constantly restart their computer to fix hard drive errors. Here are some useful solutions you can use to solve the problem quickly and easily.

How do I fix a disk error in Windows 10?

Patches ‘ Windows 10

Feedback,should i restart to repair drive errors,microsoft fsavailux reddit,windows 10 disk scan and repair,chkdsk not repairing errors,restart your pc,scan drive for errors windows 10 notification,repair errors windows 10,restart to repair drive reddit,c drive needs repair,run chkdsk in write mode,c drive won t repair,hard drive keeps needing to be repaired,how to fix driver error,disc errors windows 10,windows 10 disk repair on startup,repair external disk windows 10,disk error press any key to restart,disk error on boot,repairing disk errors windows 10 hp,scan and repair drive windows 10,Privacy settings,How Search works,windows 10 keeps telling me to restart to repair drive errors,restart to repair drive errors windows 10 2020,how to fix restart to repair drive errors on windows 10,restart to repair drive errors windows 10 reddit,restart to repair drive errors virus,windows 10 wants to repair drive errors,restart to repair drive errors does nothing,restart to repair drive errors keep showing up after reboot