Microsoft has been struggling to curb the flood of complaints from Windows 10 users about the new operating system’s tendency to crash. The only official advice so far has been to run your system in “safe mode” to see if a buggy application is the cause. But now, a new report from researchers at Microsoft suggests a much simpler solution to the problem. When Windows crashes, it often fails to save the memory (RAM) that was in use at the time, and that’s where the buggy apps are stored.
Those using Windows 10 may have noticed that Safe Mode has become somewhat unstable in the final version of the operating system. Resulting in random crashes, the problem is believed to be caused by a conflict between the Safe Mode base kernel and the current one. The solution to the problem is to replace the base kernel with one of the previous versions that never had problems, and few know that there is a way to do that.
Unfortunately, sometimes Safe Mode doesn’t work and your device can continue to crash on Windows 10, which is usually a sign that something else is seriously wrong with your device.
There are many reasons why this can be a problem, but this article will discuss how you can get around this problem in the most effective way.
How to restore failures in Windows 10 Safe Mode?
1. Running a virus scan
Malware or a virus on your Windows 10 device can have many negative consequences, including crashes, even if you open your device in safe mode.
Therefore, the first thing you should do is run a virus scan, because if you only use Windows Defender, your device may not be fully protected.
In addition, many antivirus programs can contain bugs. Therefore, it is recommended to use more reliable and bug-free programs, such as Bitdefender.
Back up your Windows 10 device and make sure it is working properly with Bitdefender.
2. Scan the file verifier
- Go to the search box, type cmd and click Run as administrator.
- Type the following commands and press Enter: Sfc /scannow
- Be sure to restart the unit after performing the above procedure.
After performing this analysis, the damaged files will be recovered. Therefore, make sure you check for an error in Windows 10 safe mode.
3. Conduct a training check
- As above, open cmd and click Run as administrator.
- Type the following command and press Enter: CHKDSK /f /r
- You will then receive a message stating that CHDSK cannot be started.
- Type Y and press Enter.
- Wait for the process to complete and restart the device.
When you run this command, it scans the partition for damaged sectors and files. Hopefully the scan will correct the problem and it will go away.
4. DSIM command implementation
- Open cmd again and run it as administrator.
- Type the following commands and press Enter after each command:Dism /Online /Cleanup-Image /CheckHealth
Dism /Online /Cleanup-Image /ScanHealth
Dism /Online /Cleanup-Image /RestoreHealth
- Wait for the DSIM commands to be executed and complete.
- Be sure to restart the unit when the process is complete.
Run a system check for errors
Press Start Scan to check for Windows problems.
Press Repair Everything to troubleshoot proprietary technology.
Run a PC scan with Restoro Repair Tool to find errors that cause security problems and slowdowns. Once the scan is complete, the recovery process replaces the damaged files with new Windows files and components.
The DISM scan should restore your installation, and when the process is complete, check Safe Mode in Windows 10.
5. RAM check
- Download a Windows MemTest86 USB image.
- Unzip the downloaded files to your computer.
- Then insert the empty USB stick into the computer.
- Find the imageUSB utility in the unzipped folder and run it.
- In step 1, make sure you have selected a USB drive.
- You can now reboot the device and the USB drive becomes the primary boot device.
- Finally, follow the instructions on the screen and MemTest86 will then perform a memory check.
If MemTest86 detects problems with your RAM, you should definitely replace it because it is defective.
6. Performing system diagnostics
- Restart the device.
- Press F12 before the startup screen, when the computer reboots.
- From the Start menu, go to the Hard Drive section.
- Find and select the Diagnostics section.
- Wait until the process is complete.
If hardware problems are identified, replace the problematic hardware.
This source has been very much helpful in doing our research. Read more about computer freezes in safe mode windows 10 and let us know what you think.
Frequently Asked Questions
Can Windows crash in safe mode?
Microsoft has made Windows 10 a lot more stable than previous versions of Windows, and even though it continues to be the most stable Microsoft operating system, it is still possible for Windows to crash in safe mode. This is because safe mode is not a separate Windows environment: it is an operating system configuration in which Windows starts without the drivers and services that are not absolutely necessary for the proper operation of Windows. Windows 10 has been around for a while now, but we still get questions about it from our readers every day. One of the most common questions is if Windows 10 can crash while in “safe mode.” The short answer is yes, it can. But before you go running for the hills, know that it’s not something you should be worried about. If you find yourself in a situation where Windows 10 is in safe mode, you have a variety of troubleshooting tools at your disposal to help you identify and fix the problem.
How do I fix Windows Safe Mode?
Some days, Windows may become unstable and start to behave erratically, or even freeze. When it does this, there are a few methods that you can use to fix it. The first thing you should try is to restart the computer, but if it continues to have issues, you can try to boot the computer into safe mode. (On a PC, safe mode doesn’t start any programs that you added to Windows. on a Mac, safe mode starts up OS X without loading any third-party add-ons.) Believe it or not, Windows Safe Mode isn’t rocket science. This troubleshooting mode is meant to help fix problems with Windows and its programs that start automatically on boot. The mode is meant to aid users who don’t have the technical skills or who don’t know how to fix problems that are causing Windows problems. In Safe Mode, you disable any third-party startup items so you can focus on the Windows start up items. When you use Windows Safe Mode, it’s important to use the correct keys to enter it. Otherwise, you can end up with a computer that won’t start. These instructions tell you how to do that.
How do I fix Windows 10 from freezing in safe mode?
When you start Windows 10 in safe mode, you will not be able to use your mouse or keyboard to get around. You are only able to use a few certain keys to navigate around the screen. You can use the left arrow key to navigate to the previous menu, the right arrow key to go to the next menu, the [Enter] key to select items, and the [Esc] key to exit if you change your mind. You can also use the number keys to select a number in the list. If you have Windows 10, you may have experience a blue screen and getting “STOP 0X000000F4” errors. There are several ways to fix this error. Most of them involve running a system file check, updating drivers, or updating your graphics card. The first step is to go into your Safe Mode. From there, you can find the problem by going into Safe Mode with Networking, and see if the computer starts up.
windows 10 safe mode from biossafe mode windows 10how to disable safe mode windows 10windows 10 safe mode keyfactory reset in safe mode windows 10computer freezes in safe mode windows 10,People also search for,Feedback,Privacy settings,How Search works,windows 10 safe mode key,computer only starts in safe mode windows 10,factory reset in safe mode windows 10,computer freezes in safe mode windows 10,system restore in safe mode windows 10,how to install drivers in safe mode windows 10,laptop only works in safe mode windows 10,how to run a program in safe mode windows 10